Possible causes of this may include: If the spa is plugged into an extension lead, If the grounding in the socket being used is incorrect, There is a problem with the electric set up in the house, There may be another appliance causing a problem in the circuit, Overloading the circuit
Read More
Is there an E0/F0 error code displaying on your MSpa? This means the ambient air temperature is too low. Or the water temperature is lower than 0°C or higher than 50°C.
Read More
The spa pumps heat the water between by approx. 1°C ‑ 1.5°C an hour, so they can take 15-24 hours to heat from cold. This may take longer in colder ambient temperatures.
Read More
Please check if your spa has this function according to the manuals. You may refer to the "BUBBLE MASSAGE" paragraph within...
Read More
When you set the timer, it means after the set number of hours FROM NOW the heater will activate:..
Read More
You may just press UVC button to activate it. You may keep it on all the time when you are in the spa...
Read More
MSpa models require different inflation methods, please make sure you read USER MANUAL before setting up your MSpa.
Read More
Leaking from base of pump. Check if the inlet and outlet is getting loose. For Lite/Comfort spas, please follow the steps below to check:
Read More
Here is a troubleshooting guide that should help to diagnose any issues you are experiencing with the massage function of your MSpa...
Read More
The issue may be caused by what the spa pump is sat upon. We would advise to check and ensure the following steps or guidelines are followed on the set up for your MSpa:
Read More