Deflating Liner
This issue might be caused by manometer(air valve) getting loose or the inflation hose connection getting loose or a hole or puncture on the liner. If your MSpa liner is deflating we recommend the following troubleshooting steps:
Check if the Manometer/Inflation Valve is Too Loose
Ensure that the manometer/ valve is fully inserted and fully secured into the inflation hole.
Check if your Liner is Punctured
To locate the puncture it is best to apply soapy water from a spray bottle to the surface of the whole liner and around the inflation valve. Bubbles should appear where the puncture is located. To fix the puncture you will require a repair repair patch and aqua glue.
WATCH NOW: HOW TO REPAIR AN AIR LEAKING LINER
For Mono spa, you may check if the valve is getting loose. You may use the wrench to tighten the valve.
If above steps do not solve the issue please contact our local service site for help.